Don’t take electrical wiring into your own hands

Avoid ‘shocking consequences’: Hire an electrician

Barry Stone
Inman News™

DEAR BARRY: Are the electrical wires in a home color-coded for positive, negative and ground? Our wires are brown, blue and green/yellow. Which ones should we connect to which screws? –Agatha

DEAR AGATHA: Assumptions should never be made when electrical safety is involved. Have an electrician verify the color coding. Residential wiring is typically black for hot, white for neutral, and green or noninsulated for ground.

Yours is different because the person who wired your home used materials commonly found in commercial electrical systems. Typical color coding for commercial wiring is brown for hot, blue for neutral, and green/yellow for ground.

Rather than connecting the wires yourself, have the electrician do the work. With electrical wiring, there is often one way to do it right and many ways to do it wrong. The cost of an electrician could spare you from shocking consequences.

DEAR BARRY: Before we bought our house, our home inspector tested the toilets and reported that they were functional. Unfortunately, these tests were just water flushes, which failed to tell the whole story.

After moving in, we had immediate problems with the toilet in the master bathroom. The fixture works OK with liquids, but simply does not dispose of solid waste. In fact, the first time we flushed it, the bowl overflowed. Isn’t there a more reliable way for home inspectors to verify the operability of toilets? –Byron

DEAR BYRON: Home inspectors have reconciled themselves to the routine banality of mere water flushes to test a home’s toilet fixtures. Such simple tests can check for evidence of leakage and ensure that each fixture is securely attached to the floor.

In nearly all cases, these inspection methods are sufficient for identification of operational defects. Unfortunately, your case may have been one of the rare exceptions. Fortunately, repair is likely to be routine and relatively inexpensive. The cause of overflow may simply be common blockage in the drain line or trap. If plunging fails to clear the line, have it checked by a licensed plumber.

To write to Barry Stone, please visit him on the Web at

Contact Barry Stone:
"Email" Email "Letter Letter to the Editor

Copyright 2011 Barry Stone
Previous articleRetire on time
Next articleHardwood floor installation musts
Jane Kiefer
Jane Kiefer, a seasoned journalist with a rich background in digital media strategies, leads South Philly Review as its Editor-in-Chief. Originally hailing from Seattle, Jane combines her outsider perspective with a profound respect for South Philly's vibrant community, bringing fresh insights and innovative storytelling to the newspaper.